Next-Gen Ranger, Raptor & Everest 2022+ Remote Start Key FOB

Free Worldwide Shipping 

Protect you investment and the key fob by adding any of the two protective cases below made specially for this aftermarket key fob 

GET A PERFECT FIT PROTECTIVE KEY FOB CASE HERE

GET A HEAVY DUTY PROTECTIVE KEY FOB CASE HERE 

Say goodbye to slow and unreliable responses from the FordPass app. With our Remote Start Key FOB, you'll have consistent control, no matter how the FordPass app performs.

Introducing the Remote Start Key FOB, tailored for the NextGen Ranger, Raptor, and Everest.

With the Katipō 4x4 Remote Start Key FOB, you can remotely start your NextGen Ranger, Raptor, or Everest, allowing you to warm up or cool down the interior before you even get in. No more dealing with uncomfortable temperatures—simply press "Lock" once, then the "Start" button twice on the key FOB from a distance and let your vehicle reach the perfect temperature.

Programming these keys takes less than 3 minutes!

NOTE: You will need both of your original key FOBs from delivery to activate the new key FOB.

Important Information:

This sale includes one (1) Key FOB.

If you have installed our Stop/Start Eliminator and use the remote start feature with this key FOB, please note that the eliminator will not automatically disable the stop/start system. This is because the remote start function doesn’t allow enough time for the eliminator to deactivate the feature, as it disables certain signals the eliminator relies on to reverse the switch.

The Ford emblem will appear on the back of the key FOB. For Raptor owners, we suggest swapping the backplate from your original key FOB onto the new remote start key FOB.

The boot release button is compatible with factory-installed roller covers on Wildtrak and Raptor models.

To operate the boot release function, your vehicle must have come equipped with a factory roller shutter. This key will not work with aftermarket roller shutters.

Brand Name: KATIPŌ 4X4 

Type: Remote

Button: 4/5

Material: Plastic

Color: Black

PLEASE READ BEFORE ATTEMPTING TO PROGRAMME FOBS!

INSTRUCTIONS

To start, the vehicle must be unlocked with the doors closed and handbrake off! You also need to make sure to put your seatbelt on while in the drivers seat. 

1. Insert your original key into the centre console backup slot (as shown in image). The Everest has a mat that covers this. You will need to remove the rubber mat, then you will see the slot.
2. Turn the ignition on for 5 seconds, but no more than 10 seconds.
3. Turn the ignition off and remove the key from the centre console slot.
4. Within 10 seconds of turning off the ignition, insert your second original key in the centre console slot.
5. Repeating step 2, turn the ignition on for 5 seconds, but no more than 10seconds
6. Turn the ignition off and remove the second key.
7. Between 3 seconds and 10 seconds of turning the ignition off, remove thepreviously coded key and insert your NEW unprogrammed key.
8. Turn the ignition from off to on ONCE . Keep the ignition on for at least six seconds. (if successful the indicators should flash)
9. Remove the newly programmed coded key.
10. If the new key FOB has been successfully programmed, it will start the vehicle’s engine by pressing the lock button ONCE, followed by a double press of the Start button on the FOB.
11. If unsuccessful, repeat steps 1 through to 9.

Please take note of the following information

To remote start the vehicle, press LOCK once then the 2x Start Button TWICE.

• If you have our Stop/Start Eliminator installed you will need to discount this while trying to program the new key fob. 
• The fourth button, which is the Boot release, will function correctly with factory-installed roller covers on Ranger Raptor and Wildtrak models.
• After two remote start events, it is necessary to drive your vehicle. If you attempt to remote start the car more than twice without driving it, the remote start function will not activate.